Hori Fighting Stick PS4 yang diperbaiki dan dimodifikasi di Keoliz. Sekarang menggunakan tombol Sanwa OBSF30, tongkat Sanwa JLF. Bekas tapi masih bagus.
Hori Fighting Stick for PS4/PS3 that was fixed & modded at Keoliz. Now it features 8x Sanwa OBSF30 buttons, and a Sanwa JLF lever. They're not brand new but they still work.
Ketika pertama kali dikirim ke bengkel Keoliz stick Hori ini dalam keadaan sudah dipasang tombol Sanwa, tapi nga ada 1 pun tombol yang terhubung ke PCB. Lever masih Hori Hayabusa, mirip seperti Hayabusa yang kalian temukan di stick Hori Mini Fighting Stick.
All 8 buttons had been installed when the stick arrived at our workshop, but not a single of them was connected to the main PCB. It still used a Hori Hayabusa lever, similar to the one you find on the Hori Minis.
Sekun/quick disconnect yang sudah putus kami ganti dengan baru; kita jepit sedikit tiap sekun lama dari Hori(karena kelonggaran untuk OBSF30).
So we installed new quick disconnects to replaced the missing ones; we crimped lightly the old ones because there were still some of them left but they were too loose for OBSF30's.
Sewaktu kita pasang kabel JST/molex 5 pin eh JLF tidak bekerja dengan normal. Ternyata microswitch(MS-O-2P) ada yang sudah rusak. Beruntung masih bisa diselamatkan dengan dibersihkan bagian dalam nya. Teknisi pun membersihkan microswitch yang lain; microswitch Hayabusa yang nganggur pun ikut dibersihkan nya.
While we were installing a 5 pin JST cable we felt like there was something off with the JLF lever. It turns out one of the microswitches of this lever is dead. Fortunately we could still fix it by cleaning its inner parts. While we were at it the technician also cleaned the other MS-O-2P(JLF microswitches); including the ones on the Hayabusa lever.
more photos: https://photos.app.goo.gl/tR7bv1ZSaoQ53zfW6
No comments:
Post a Comment