Not our first stick, but the following stick was the first fully functioning custom arcade stick purchased from our shop, back in December 2009.
Bermula dari pemain asal Malang yang sudah pernah buat stick arcade rakitan, tetapi dia tidak puas. Spare part yang ada di stick rakitan dia yang pakai kayu, dipindah ke stick yang dia ingin beli dari kita.
The project began when a player from Malang who had built a custom stick, but he wasn't satisfied with what he got. So the parts he had in his stick, were taken off and then installed into a different stick, the one he was going to order from us.
Sempat menemui tantangan-tantangan seperti kita harus dua kali lubangin kaca plexi karena kaca yang pertama rusak di tengah pengerjaan, crop gambar Siegfried yang butuh sekitar 5 jam.
We had difficulties like when we had to get new plexi glass because the first one was damaged while we were drilling it, or when the graphic artist had to spend 5 hours on cropping Siegfried's artwork alone.
Karena ini salah satu produk pertama yang kita buat, masih ada beberapa kekurangan. Seperti bagian kancing baut yang kurang kuat, sambungan kabel ke PCB yang kurang kuat, jarak antara tombol yang kejauhan.
And since this was one of our earliest products it had several faults. Like the thing that held screws wasn't strong, one of the cables wasn't properly soldered, the gap between buttons were also too big.
Terima kasih tapi untuk si orang Malang yang sudah percayakan kita untuk buat stick arcade untuk dia.
However we were grateful for our customer from Malang for believing in us. Thank you.
foto lain bisa dilihat di https://goo.gl/photos/6N5LdBUZYp5FPvV99
more photos can be found at https://goo.gl/photos/6N5LdBUZYp5FPvV99
No comments:
Post a Comment